1070 aluminum slug
Aluminum ingots are compounded of high-aluminum alloys with an aluminum purity of ≥99.97%, which is so-called pure aluminum. The most widely used raw material is alloy number 1070, which has the characteristics of good formability and corrosion resistance.
The 1070 H16~20 produced by MC Aluminum can be customized in shape and size according to customer requirements. 1070 aluminum ingots of different shapes have been heat treated, softened annealed, surface rolled or sandblasted. 1070 aluminum ingot has excellent anti-corrosion properties, beautiful appearance, good flexibility and ductility.
Aluminum slugs are widely used in the manufacture of aluminum containers or collapsible aluminum tubes for cosmetics, pharmaceuticals, beverage containers and many other packaging solutions. Aluminum ingots are widely used in cosmetic packaging tubes (lipstick tubes, lipstick boxes, mascara, eyebrow brushes, perfume atomizers, cheat boxes, brushes, lip gloss boxes, accessories, medicine tubes, folding tubes, toothpaste) cold extrusion or deep drawing End-use tubes, capacitor shells, etc.) household utensils have good oxidation quality on their surfaces.
Chemical composition of 1070 aluminum slug:
| Si | 0.25 |
| Fe | 0.25 |
| Cu | 0.04 |
| Mn | 0.03 |
| Mg | 0.03 |
| Cr | – |
| Ni | – |
| Zn | 0.04 |
| Ca | – |
| V | 0.05 |
| Ti | 0.03 |
| Other | 0.03 |
| Min Al | 99.7 |
Basic information of 1070 aluminum block:
| Alloy | 1070 |
| Thickness | 3~10mm or as required |
| Diameter | 20mm, 25 mm, 27mm, 40mm, 45 mm, 50 mm, 54 mm, 63.5 mm, 74 mm, 75 mm, 85 mm, 89 mm, 90 mm and, 116 mm or as required |
| Shape&design | flat round without hole, dome, oval, rectangle, round with hole etc. |
| Surface | treatment Tumble rolled or shot blasted |
| Tensile strength | 70Mpa |
| Hardness | 65-125Hv |
| NO. of grains/mm | 2 – 65~95 |
Contact Us