7075 is a cold-processed forged alloy with high strength, much better than mild steel. 7075 aluminum alloy is one of the commercially available strong alloys. General corrosion resistance, good mechanical properties and anodic reaction. The fine grains enable deep drilling performance, enhanced tool wear resistance, and thread rolling to be more distinctive.

7075 is an aerospace aluminum that belongs to the Al-Zn-Mg-Cu series superhard aluminum alloy and is one of the strongest aluminum alloys. It has high strength and good corrosion resistance, good fatigue strength, and average machinability. However, its plasticity and high-temperature strength are low, so it is suitable for use as load-bearing structural parts at room temperature and below 120°C. The alloy is easy to process and is widely used in the aviation and aerospace fields, and has become one of the important structural materials in this field. MC Aluminum stocks: 7075-T651, 7075-T6511, 7075-T7351, 7075-T3511 and 7075-T76511, etc.

Features of 7075 aluminum rod products used in aviation field:

1. High strength heat treatable alloy.

2. Good mechanical properties.

3. Good usability.

4. Easy to process and good wear resistance.

5. Good corrosion resistance and oxidation resistance.

6. The welding performance is poor and cracks are prone to occur during welding. It cannot be fusion welded, but it can be contact welded by strong pulse current. 7075 alloy is commonly connected by riveting or cementing process.

7075 aluminum round rod application

1. Aviation field: Mainly used to make aircraft skins, fuselage frames, girders, propellers, fuel tanks, wall panels and landing gear struts, as well as streamlined covers, rotary tables, remote control and main components of space launch vehicles, and engine devices.

2. It is also widely used in the fastener industry, mainly used to produce various types of nuts and shear-resistant high-lock nuts.

The product composition complies with the national aluminum plate standards. The aluminum plates, rolls, and plates have clean surfaces, uniform thickness, small length and width tolerances, and excellent mechanical properties, which can satisfy customers with different uses.